ESP32 Laser-Cut Word Clock

A 30 cm word clock with an etched glass face, laser-cut MDF light wells and 114 addressable LEDs driven by an ESP32 with a web interface · 2 parts · 7 steps · By t0mg

Gather the parts
Make the faceplate
Cut and glue the frame
Build the LED matrix
Wire the controller board
Flash the firmware
Close it up and configure

Text licensed CC BY-SA 4.0 · photos and quotes © their owners

ESP32 Laser-Cut Word Clock

By t0mg · Example build · 8 views · 0 remixes

A 30 cm word clock with an etched glass face, laser-cut MDF light wells and 114 addressable LEDs driven by an ESP32 with a web interface

0SaveRemixCopy link

Estimated parts cost

No price seen yet

Difficulty

Moderate

Parts

2 parts · 2 pcs

Start the assembly guide